Summary: 300mm Wall Mounted Square Stainless Steel Head, Handheld & Riser Rail - Thermostatic Mixer Shower Kit
Bring a designer look to your bathroom with our 300mm Square Stainless Steel Head & Handheld, designed to match its functionality are its cutting edge looks. The mixer valves and modern handset are an addition to its beauty. Built with solid metal and finished in chrome it is anti-corrosive and long lasting. We care not only about looks, comfort and safety too is important to us. Hence included in this shower kit are a handy handheld and a flexible shower hose. The high quality Vernet thermostatic mixer valve and Neoperl work together to make sure you are protected from potential scalding. The thermostatic mixer is pre-set at 42 degree and does not allow any water hotter than this to leave the shower; it automatically shuts down in case the cold water supply fails. You also get an astounding free 10 year warranty
Product Specification
| SKU: | SS9249 |
| Mixer Height: | 210mm |
| Mixer Width: | 120mm |
| Head Diameter: | 300mm |
| Projection Of Head: | 400mm |
| Mixer Material: | Chrome plated solid brass |
| Head Material: | Stainless Steel |
| Outlets / Diverter Style: | 2 Way |
| Head Style: | Square |
| Shower Head Fitting: | Wall Mounted |
| Shower Arm Material: | Chrome plated solid brass |
| Minimum Pressure: | 0.2 BAR |
| Recommended Pressure: | 1 to 3 BAR |
| Flow Rate (at Minimum Pressure): | 2.2 L/min |
| Flow Rate (at Optimal Pressure): | 16 L/min |
Accreditations & Testing
| • WRAS approved flow cartridge |
Additional Information
| Includes: | Shower Arm (SA24) |
| Shower Head (SH112) | |
| Concealed Shower Mixer (SM526) | |
| Hand Held (SD401) | |
| Hose (SD90) | |
| Bracket (SC03) | |
| Riser (SR491) |
Please Note:
Working Requirements
Our thermostatic showers work on water systems that produce a minimum of 0.2 bar water pressure. This can be achieved by using one of the following systems:
- Combination boiler systems
- Gravity fed systems (only with a pump)
- Megaflow system
- Pumped hot water systems
- Un-vented hot water systems
- Standard pressurized hot water cylinder type systems
Temperature control cartridge: The included VERNET thermostatic control valve has its temperature pre-set at a maximum of 42 degree for extra safety. There is also an automatic shutdown function if cold water pressure should suddenly fail.
Check Valves: Neoperl check valves are included, which permit water to merely flow in one direction and prevent unwanted backflow of water in the opposite direction.
